Lanier DIGITAL COLOR PRINTER/COPIER 5722 User Manual Page 35
- Page / 173
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
32
There are three methods available for enlargement and reduction copying.
● Using Automatic Magnification Selection (AMS):
After selecting the AMS mode and the copy size, when you place an original on the glass or
when an original is fed from the reversing automatic document feeder, the copier automatically
detects the size of the original, and calculates the appropriate reproduction ratio.
● Specifying the original and copy sizes:
When you specify both the original and copy sizes, the copier automatically calculates the
appropriate reproduction ratio.
● Using the ZOOM keys:
The ZOOM keys DOWN and UP allow selection of the desired reproduction ratio
from the range of 25% to 400% at increments by 1%.
* See page 82 for X-Y zoom.
1
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the originals.
4
Using Automatic Magnification Selection
6. REDUCTION AND ENLARGEMENT COPYING
Press the ZOOM ORG. LT KEY.
3
Press the desired COPY-SIZE key.
● The selected COPY-SIZE key gets highlighted.
2
Press the AMS key.
● The AMS key gets highlighted.
- Operator Guide 1
- Storage of Color Copies 2
- Forgery Prevention Function 3
- CONTENTS 4
- PRECAUTIONS 4
- Features of the FC22 5
- TABLE OF CONTENTS 6
- TABLE OF CONTENTS (Cont.) 7
- 32 inches 8
- PRECAUTIONS (Cont.) 9
- DESCRIPTION 10
- OF THE DIGITAL 10
- CLASS 1 LASER PRODUCT 11
- LASER KLASSE 1 11
- APPAREIL A LASER DE CLASSE 1 11
- 3 Staple sorter 12
- 2 Automatic duplexer 12
- 4 Large-capacity feeder 12
- 5 Key copy counter 12
- 2 5 6 73 13
- 14 13 12 14
- 8 9 10 11 14
- 2. HOW TO MAKE COPIES 20
- 1. PAPER 21
- Recommended Paper 22
- ENERGY-SAVING FUNCTION 23
- Turning ON the Power Switch 24
- Auto Job Start 25
- Press the START key 26
- Procedure 31
- Yellow indicator lines 32
- FUNCTION CLEAR 33
- Press the AMS key 35
- Using the Zoom Keys 38
- 9. COLOR MODE 43
- Bypass Copy Mode 44
- Thick Paper 47
- Set the copy quantity 48
- OHP Films 49
- . INTERRUPT COPYING 52
- COLOR EDITING AND 54
- ADJUSTMENT 54
- 1. MONOCOLOR COPYING 55
- 2. HUE ADJUSTMENT 56
- 3. SATURATION 57
- 5. RGB ADJUSTMENT 59
- 7. BACKGROUND ADJUSTMENT 61
- 8. SHARPNESS ADJUSTMENT 62
- 1. IMAGE SHIFT COPYING 65
- Edge-erased copyOriginal 67
- Center Erasing 69
- No Center Erasing 69
- 4. DUAL-PAGE COPYING 71
- 5. FULL IMAGE COPYING 73
- Originals Copy 74
- Press the SET key 75
- Originals Duplexed copy 76
- 7. DUPLEX COPYING (Cont.) 77
- 8. X-Y ZOOM 85
- 9. TRIMMING/MASKING 86
- 9. TRIMMING/MASKING (Cont.) 87
- 10. MIRROR IMAGE 90
- 12. CENTERING 92
- 12. CENTERING (Cont.) 93
- 13. IMAGE REPEAT 94
- (Cont.) 95
- 1. CALIBRATION OF GRADATION 97
- CALIBRATION OF GRADATION 99
- 2. SETTING THE DATE AND TIME 100
- 3. WEEKLY TIMER 102
- 4. JOB MEMORY 104
- 4. JOB MEMORY (Cont.) 105
- Original 106
- 5.8"~17.0" 106
- (150~434mm) 106
- Size mark plate 107
- Paper size indicator 107
- USING THE 108
- FUNCTIONS 108
- Electronic Access Control 110
- Clearing Counters 111
- Questions and Answers 111
- 6. ACCESS CODES (ID NUMBERS) 112
- 7. TOTAL COUNTER 113
- 8. DEPARTMENT MANAGEMENT 114
- (up to 120 codes) 116
- Press the YES key 118
- 1 2 3 4 5 6 122
- CHANGE LANGUAGES key 123
- CLEAR key is pressed 124
- Next or Pre key 124
- USING THE OPTIONAL SORTER 126
- STAPLE 127
- Non-sort bin 127
- 2. NON-SORT COPYING 128
- STAPLE SORT key 129
- 2 in 1 stapling position 130
- Stapling position 130
- STAPLE key 132
- 4. GROUP COPYING 133
- WHEN THE 134
- GRAPHIC SYMBOLS 134
- Side guideSide guide 135
- 0.5mm 0.5mm 135
- TRAY DOWN key 137
- Elevator tray 137
- Guide plate at rear side 137
- 2. REPLACE TONER BAG SYMBOL 139
- Close the used toner bag 140
- 3. ADD TONER SYMBOL 141
- 4. CLEAR PAPER SYMBOL 143
- Remove the misfed paper 144
- Open the exit cover 144
- Open the bypass guide 144
- Fuser unit 146
- Close the sheet bypass 147
- Lower guide of exit side 148
- Close the feed side cover 150
- : Misfeeding in the Sorter 154
- 5. REPLACING STAPLES 155
- 6. REMOVING JAMMED STAPLES 157
- Wing nut 158
- 7. CALL SERVICE SYMBOL 159
- 8. PERIODIC MAINTENANCE 159
- MAINTENANCE 160
- 1. DAILY INSPECTION 161
- 2. SIMPLE TROUBLESHOOTING 162
- SPECIFICATIONS 164
- ACCESSORIES & 164
- 1. FC22 SPECIFICATIONS 165
- 3. PACKING LIST 168
- Function set first 169
- Function set last 169
- Customer Vision 172
Related products and manuals for Laser/LED printers Lanier DIGITAL COLOR PRINTER/COPIER 5722
Laser/LED printers Lanier 2001 User Manual
(210 pages)
(210 pages)
© 2020, manymanuals.com. All rights reserved. | 1.999 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals